DOBINSON I.M.S. FRONT & REAR GAS MONO-TUBE SHOCKS with I.F.P Technology - ONE SET of 4 - suit all +2"/50mm RAISED HEIGHT TOYOTA LAND CRUISER 80 SERIES & 105 SERIES WAGONS 1992-11/2007 FZJ, HZJ, HDJ MODELS.

MASSIVE 60mm BIG BORE DESIGN ( 2.5" PISTON Dia. )
HUGE 66mm 'SINGLE SKIN' (Mono-tube) DESIGN FOR EFFECIENT DISSAPATION OF INTERNAL HEAT allowing rapid cooling under heavy usage conditions.
SUPA STRONG 3mm THICK BODY CASING FOR THOSE DIRT REGIONAL ROADS & TRACKS.
VERY HIGH QUALITY, DURABLE SHAFT
VERY HIGH QUALITY TRIPLE SEAL DESIGN
INTERNAL FLOATING PISTON TO SEPARATE THE NITROGEN GAS FROM THE HYDRAULIC FLUID FOR TOTAL 'COHESIVE' CONTROL IN ALMOST ANY CONDITIONS.
ENGINEERED MULTI STAGE, VELOCITY SENSITIVE VALVING FOR GOOD CONTROL AND OFFERING EXCELLENT HANDLNG & RESPONSE.
FULL 'ONE PIECE' BODY MOUNTS FOR SUPERIOR STRENGTH & EXTRA DURABILITY
QUALITY HEAVY DUTY RUBBER BUSHINGS FOR ADDED RIDE COMFORT & LESS NVH
THESE SHOCKS OFFER GREAT DURABILITY IN ALL CONDITIONS & LONG TERM EXCELLENT VALUE FOR MONEY!

GREATLY IMPROVE YOUR DURABILITY AND CONTROL OF YOUR HEAVY VEHICLE WEIGHTS with Premium DOBINSON'S EXTRA BIG BORE, I.M.S. MONO-TUBE GAS SHOCKS with IFP Internal Foating Piston Tech!

*** NOTE: FREE SHIPPING TO MOST CAPITAL METRO & MOST 'MAJOR' REGIONAL CENTRES - Some OUTER REGIONAL AREAS MAY ATTRACT A SMALL FREIGHT SURCHARGE.

*** Our FREE SHIPPING EXCLUDES SOME OUTER REGIONAL & ALL REMOTE AREAS OF ALL STATES INCLUDING ALL OF W.A. (Outside Perth Metro.), ALL OF N.T. & AREAS NORTH OF CAIRNS METRO. - We will discuss this with you during processing and before despatch of your order!

DOBINSON IMS 2 Inch LANDCRUISER 80 & 105 SERIES H.D. I.F.P. FRONT & REAR SHOCKS

Name: DOBINSON IMS 2 Inch LANDCRUISER 80 & 105 SERIES H.D. I.F.P. FRONT & REAR SHOCKS
SKU: IMS59-60683 x 2 + IMS59-60682 x 2

SKU: IMS59-60683 x 2 + IMS59-60682 x 2

AU$1,199.00

AU$1,099.00

Quantity

MASSIVE 60mm BIG BORE DESIGN ( 2.5" PISTON Dia. )

HUGE 66mm 'SINGLE SKIN' (Mono-tube) DESIGN FOR EFFECIENT DISSAPATION OF INTERNAL HEAT allowing rapid cooling under heavy usage conditions.

SUPA STRONG 3mm THICK BODY CASING FOR THOSE DIRT REGIONAL ROADS & TRACKS.

VERY HIGH QUALITY, DURABLE SHAFT

VERY HIGH QUALITY TRIPLE SEAL DESIGN

INTERNAL FLOATING PISTON TO SEPARATE THE NITROGEN GAS FROM THE HYDRAULIC FLUID FOR TOTAL 'COHESIVE' CONTROL IN ALMOST ANY CONDITIONS.

ENGINEERED MULTI STAGE, VELOCITY SENSITIVE VALVING FOR GOOD CONTROL AND OFFERING EXCELLENT HANDLNG & RESPONSE.

FULL 'ONE PIECE' BODY MOUNTS FOR SUPERIOR STRENGTH & EXTRA DURABILITY

QUALITY HEAVY DUTY RUBBER BUSHINGS FOR ADDED RIDE COMFORT & LESS NVH

THESE SHOCKS OFFER GREAT DURABILITY IN ALL CONDITIONS & LONG TERM EXCELLENT VALUE FOR MONEY!
From a safety point of view, 90% of all brands of shock absorbers should be replaced or overhauled at least every 100-120,000k under most normal driving conditions if you expect them to maintain a reasonable level of vehicle control, especially in an emergence reaction situation to avoid a possible accident.

In some cases they may need to be replaced even sooner if used in our harsh outback conditions, corrugated tracks or with heavy rate coils and heavy loads under 4WD vehicles.

SHOCK FACTS:

Shock absorber fluid becomes thinner over time (just like your engine oil), due to condensation build up over time from the typical cold-hot-cold life cycle of all shock absorbers.

The internal, moving parts also wear over time and eventually loose their correct tolerances. All of this means that most shocks will not be performing at anywhere near their optimum (as new performance or control) after around 80-120,000k.

This is the reason that shock absorbers should be replaced at regular intervals to maintain that safety edge for you and the passengers in your 4WD, (your family in most cases, we would think).

Remember that it is your shock absorbers that keep your tyres in contact with the road and maintain stability of your vehicle, especially under unforeseen situations that require a fast response to avoid objects or to provide the shortest possible braking distances to avoid crashing your 4x4 !

There are only two other components on your 4WD that are as important or more important than good, well performing shock absorbers – BRAKES and TYRES and you need to maintain those in excellent condition as well !

Note – We try to use actual product images of the items we sell but some images may be indicative only and may vary from the actual product part number described!

Questions? - call us on 0406 476 840 or email us at info@4wddirect.com.au

Call Us: 0406 476 840

DOBINSON IMS 2 Inch LANDCRUISER 80 & 105 SERIES H.D. I.F.P. FRONT & REAR SHOCKS

DOBINSON I.M.S. H.D. GAS L.C. SHOCK FEATURES:

Warranty Terms & Conditions

SOME HELPFUL SHOCK ABSORBER FACTS:

* NOTE - 4WD DIRECT FREE SHIPPING EXCLUSIONS: